Avermedia EXR6004 Instrukcja Użytkownika

AVerMedia® AVerDiGi EXR6004 Mini User Manual July 2010

2 1.2 Front Panel Name Function (1) DVR Power LED Light when the unit is power on (2) HDD LED Indicate the hard disk running state. Light when t

92 Chapter 8 Web Tools The bundled Web Tools includes Dispatch Server , Remote Backup, and Remote Setup program. To install Web Tools, place the CD

93 8.2 Remote Setup Remote Setup is a tool for configuring DVR server from remote site. To install Remote Setup application, insert the Installation

94 6. When connection is lost, click Reconnect to connect again. 7. To modify or delete the added DVR server, select the DVR server from listing an

95 - Auto Scan Period Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next video in cycle dependi

96 Enable/disable audio of the camera. - Name Change the camera name - Description Add a short comment (5) IP Camera Information Click IP Setting t

97 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting window, click Update to save and apply the new settings, cli

98 8.2.2.3 Record Setting In the Recording setup window, click OK to accept the new settings, click Exit to exit without saving, and click Default t

99 - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is no motion, it reco

100 8.2.2.4 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click

101 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.

3 1.4 Setting Up the DVR Unit 1.4.1 Installing the Hard Disk i - For hard disk spec, please referring to http://www.avermedia.com/AVerDiGi/Product/

102 8.2.2.5 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm

103  Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message.  Abnormal Reboot: when the DVR sy

104 - Send E-mail Send an electronic text message. Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to e

105 - PTZ preset point - Position the PTZ camera based on the preset point setting. Next to the PTZ preset point check box, click Detail. In the Tr

106 8.3 Remote Backup Remote Backup is purely for backing up the *.dvr file from the DVR sever. You can select between Auto Backup and Manual Backup.

107 - Enable/disable Disk Recycle check box, to automatically overwrite the oldest file when there is not enough free space to backup the file. Manu

108 8. For manually backup, click File select button and select the DVR to backup.

Appendix A Registering Domain Name DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for tra

4 5. Secure the hard disk inside the unit then place unit cover 6. Push the cover forward and secure the cover 7. You may now connect all the

5 1.4.2 Connecting Devices The back panel of the DVR unit, user can connect the 4 sensor devices, 1 alarm device, audio input/outpu

6 1.4.3 Connecting the Audio, Sensor and Relay Device The Sensor, Alarm, and audio port enable you to connect 4 sensor inputs, 1 relay outputs, and

7 Chapter 2 Operating the DVR unit 2.1 First Time Using the DVR Unit 1. Connect the mouse to the USB port located at front panel of the DVR unit. 2

8 2.1.1 Using the Virtual Keyboard User can use the Virtual Keyboard when the keyboard is not available. Just click or right-click screen to call

9 2.2 Familiarizing the Buttons in Preview Mode Name Function (1) Exit Call up the Logout dialog box. In the logout dialog box, you may do the fol

10 Name Function (15) Full screen View in full screen. To return, press the right button of the mouse or ESC on the keyboard or click

11 2.2.1 Setting Up and Using the Emap E-Map can hold up to 8 maps in *.jpg format. You may locate the camera, sensor and relay on the map. 2.2.1.1

FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

12 2.2.2 Familiarizing the Buttons in PTZ Camera Controller (1)(11)(2)(3)(4)(5)(6)(7)(8) (9) (10) Name Function (1) Close Exit PTZ camera controll

13 2.2.2.1 Setup the IP PTZ Camera When IP PTZ camera has successful connected with the DVR system, user can use the PTZ function directly without a

14 2.2.3 Using Event Log Viewer Show the record of activities that take place in the system. 1. Click the Event Log button on DVR system main inte

15 2.3 To Playback the Recorded Video To switch in Playback mode, click Playback button at the lower right corner of Preview mode user interface. Na

16 Name Function (5) Date Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. The numbe

17 Name Function Click to exit fromfull screen mode When you switch to full screen in multiple-screen mode, Left click to toggle to only display one

18 - Add to create the new reference mark in the bookmark list. - Edit to change the mark description. - Delete to remove the selected reference m

19 2.3.3 Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search Setting dialog

20 Chapter 3 Customizing the DVR System In the Preview screen mode, click button to customize your DVR. Enter the ID and password to authenticate

21 (2) Delete recorded data after If you want the system to automatically erase the data after a certain days, enable the Delete recorded data after

WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE,

22 (7) Touch Monitor When DVR server is connected with touch monitor, user needs to adjust touch monitor in order to work normally. 1. Connect the t

23 Automatically start network connection when the DVR is executed. - Default user Automatically log in to the selected default user when the DVR

24 (11) Firmware  Product Version Update: Upgrading the firmware of DVR system. 1. Click Update button, a Firmware Upgrade window will show up. 2

25 3.2 Camera Setup Click Default will back to the factory default value. 3.2.1 To Setup the IP Camera (1)(2)(3)(4)(5) (1) Camera Icons Select the c

26 IP Setting: Click IP setting to add the IP camera. 1. Click the radio button of Protocol to start setup IP camera. 2. Select the Protocol, Mo

27 1. Click Sensor button. 2. Click the drop-down list and select the sensor ID number. 3. Enter sensor name in Name column 4. The system autom

28  Relay Setting 1. Click Relay button. 2. Click the drop-down list and select the relay ID number. 3. Enter relay name in Name column 4. Th

29 3.2.2 To Setup Camera from the Remote DVR User can add the camera from another DVR through the network. (1) Camera Icons Select the camera numbe

30 Select the channel of connected camera - Connect Click to connect the camera when all configurations are set. 3.3 Recording Setup (1) Camera Ico

31 Start recording the video from the selected camera only when the system detects movement. Once a motion is detected, the system automatically save

WARRANTY NOTICE LIMITED WARRANTY AVerMedia INFORMATION, Inc. warrants this product to be free of defects resulting from faulty manufacture or compone

32 3.4 Network Setup Click Default will back to the factory default value. (1)(2)(3)(4)(5)(6)(7) (1) Server Name Assign a name for the DVR unit. Alph

33  Using the following IP address: Assigns an IP address for the DVR system. Fill in the IP related parameters in IP information section. - IP: As

34 Adjust the DVR system time same as network time server. Fill in the Time Server IP address or domain name and select the Time Zone. User can enabl

35 3.5 Schedule Setting Schedule to record, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number from 00

36 3.6 Backup Setup In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 04 represe

37 3.6.1 Using QPlayer to Playback Backup Video You can playback the backup files using QPlayer applications on the PC. When you back up the recorde

38 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN FI

39 3.6.2 To Cut and Save the Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pau

40 3.6.4 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text

41 3.7 Sensor Setting The I/O device must be installed to use this function. 1. The system automatically detects the I/O device that has connected

Table of Contents Chapter 1 Introduction ... 1 1.1 Package Co

42 3.8 Relay Setting The I/O device must be installed to use this function. 1. The system automatically detects the I/O device that has connecte

43 3.9 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm settin

44  Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message.  Abnormal Reboot: when the DVR sy

45 - Relay Output Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it stops the

46 - Start Recording Record the video from the selected camera. 1. Next to the Start Recording check box, click Detail. 2. In the Alarm Recordin

47 3.10 User Setup Only administrator level authority can access User Setting. The maximum user accounts are 32. In the User Setting dialog box, cli

48 (2) Control Right Enable the items that would allow the user to access. (3) Web Viewer Enable/disable Web Viewer control right that allow the user

49 Chapter 4 Using the USB Playback Console 4.1 Recommended system requirements Pentium® 4 2.4GHZ or above Windows® 2000/ XP/7 DDR 256 MB Gr

50 4.3 Running the USB Playback Console To run the application, click the icon on the PC desktop Name Function (1) Exit To close the application

51 Name Function (4) Open File To select the video file source for playing. - DVR Recorded File (HD): To playback the recorded video from the

3.10 User Setup ... 47 Chapter 4 U

52 Name Function (14) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless picture and #2, if

53 4.3.3 Playback Backup File(*.dvr) 1. Click Open File button. 2. Select Backup File(*.dvr) and click OK. 3. Select to open by date or by file.

54 4.3.4 To Backup Recorded File HDD backup function allows user to backup recorded file from hard disk. 1. Click Adv. Function → HDD Backup on US

55 Chapter 5 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video pic

56 Name Function (12) Noise Reduce Adjust the softness and repair the damaged colours. (13) Sharpness Improve the overall image by enhancing edges.

57 Chapter 6 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature

58 6.1 Familiarizing the Buttons in WebViewer Right-clicking on the WebViewer video screen, enables you to start video recording, change video qual

59 Name Function (14) Select cameras to view Select to the view camera from different server. In Select Camera dialog box, Display column, click to

60 6.1.1 To Setup Remote System Setting The setting here applies to Remote DVR only. Click the selection to configure. 6.1.1.1 System Setting In t

61 - Auto Scan Period Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next video in cycle dependi

Chapter 8 Web Tools ... 92 8.1 Dispatch Server ...

62 Enable/disable audio of the camera. - Name Change the camera name - Description Add a short comment (5) IP Camera Information Click IP Setting t

63 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting window, click Update to save and apply the new settings, cli

64 6.1.1.3 Record Setting In the Recording setup window, click OK to accept the new settings, click Exit to exit without saving, and click Default t

65 - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is no motion, it reco

66 6.1.1.4 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click

67 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.

68 6.1.1.5 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm s

69  Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message.  Abnormal Reboot: when the DVR sys

70 - Send E-mail Send an electronic text message. Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to ex

71 - PTZ preset point - Position the PTZ camera based on the preset point setting. Next to the PTZ preset point check box, click Detail. In the Tri

72 6.2 Familiarizing the Buttons in WebViewer PTZ (1)(2)(3)(4)(6)(5) Name Function (1) Direction buttons Adjust and position the focal point of t

73 6.3 Familiarizing the Buttons in Remote Console Name Function (1) Exit Close the Remote Console. (2) Split Screen Mode Select from 1 or 4-s

74 6.3.1 To Setup Remote Console Setting Click Setup button to call out the System Setting window. Click OK to exit and save the setting and Cancel

75 6.3.2 Familiarizing the Buttons in PTZ Camera Controller (1)(11)(2)(3)(4)(5)(6)(7)(8) (9) (10) Name Function (1) Close Exit PTZ camera controller

76 6.4 Using the Remote Playback To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, choo

77 6.4.1 Familiarizing the Buttons in Local Playback Name Function (1) Split Screen Mode Select from 1 or 4-split screen type to playback the re

78 Name Function (5) Playback Control Buttons From left to right order: Begin: Move at the beginning of the recorded video file. Previous: Go back to

79 Name Function (12) Segment Keep a portion of the recorded video you want (see also Chapter 6.4.1.1). (13) Full screen View in Playback-compact mo

80 6.4.2 Familiarizing the Buttons in RealTime Playback Name Function (1) Split Screen Mode Select 1 or 4-split screen type to playback the recor

81 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN FI

1 Chapter 1 Introduction AVerDiGi EXR6004 Mini brings you the new version of pure NVR. With Compact size, it provides 4 channel video and audio inpu

82 6.4.3 Familiarizing the Buttons in Download and Playback Name Function (1) Exit To close the application. (2) Progress bar Show the progress o

83 Chapter 7 Using HandyViewer to Access DVR Server Users can use a mobile phone to access the DVR through Internet. Make sure

84 4. When you are prompted, click Yes to install the application using the default directory. 5. When done, click OK. 7.1.2 To install PDAView

85 7.1.3 To Use the PDAViewer 1. Run the PDAViewer in the Programs. 2. Familiarizing the PDAViewer buttons. (7)(6)(5)(3)(4)(8)(9)(10)(1)(2) Name

86 3. To change the video quality, enable/disable audio, and select to display different camera, tap on the video screen longer the popup menu will

87 11. User can change the relay status. Select the relay and tap on video screen longer the pop up menu will appear, and then, select the status (

88 7.2.2 To Use the JavaViewer 1. Run the JavaViewer program. 2. Enter the DVR IP address, port number, user ID, and password. Please refer to yo

89 7.3 Using iPhone to Access Remote DVR Server Using the iPhone can connect to remote DVR server through the Internet to view the live image. 7.3.

90 II. Using iPhone to Download 1. Please make sure your iPhone connect to the Internet. 2. Select App Store from iPhone main screen. 3. Select S

91 3. After login, user should see the live video on iPhone screen. 4. Click the channel number (1 ~ 32) can switch to view each channel. 5. Clic