Avermedia AVerDiGi Instrukcja Użytkownika

AVerMedia® AVerDiGi SEB3104H User Manual Oct. 2009

4 1.4 Back Panel Name Function (1) LAN Port For Ethernet connection (2) CH1~ 4 Input the video camera signal and display it on channel 1~ 4 (3)

94 10. The sensor and relay devices will list as below: 11. User can change the relay status. Select the relay and tap on video screen longer the

95 8.2 Using JavaViewer to Access DVR Server Using the mobile phone within Symbian Smart Phone OS to access the DVR through Internet. Make sure your

96 6. To switch to different camera view, select menu and select the channel. 7. The JAVAViewer support PTZ control function, you can refer to Hel

97 Appendix A Registering Domain Name DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating domai

98 Appendix B Network Service Port The following table shows the ports that DVR server uses for certain network service. Port# Variable Remote

WARRANTY NOTICE LIMITED WARRANTY AVerMedia INFORMATION, Inc. warrants this product to be free of defects resulting from faulty manufacture or compon

5 1.4.1 Setting Up the DVR Unit 1.4.2 Installing the Hard Disk The DVR unit allows user to install 1 SATA hard disks inside the DVR unit. i For h

6 5. Secure the hard disk inside the unit then place unit cover 6. Push the cover forward and secure the cover 7. You may now connect all the c

7 1.4.3 Connecting Devices The back panel of the DVR unit, user can connect up to 4 cameras of analog camera and 4 audio in device(ex: microphone) an

8 1.5 Audio, Sensor, Relay and RS485 pinhole allocation The Sensor and Alarm enable you to connect 4 sensor inputs, 2 relay outputs and 1 PTZ camera

9 1.5.4 RS485 Pin Definition When connect PTZ camera through RS485 interface, please refer to the following pin definition to connect the DVR and PT

10 Chapter 2 Using the DVR Software Please use the mouse with virtual keyboard to configure DVR setting. 2.1 First Time Using the DVR Unit Step 1.

11 Step 2. Formatting the Hard Disk The hard disk must be formatted before user can use it with DVR unit. Following the below steps to format the ha

12 Step 3. Adjust the Date and Time Setup the Date and Time in order to have correct system time and date. Following the below steps to setup date a

13 5. In the Time box, click to adjust the time. 6. Click OK to save the setting.

FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may n

14 Step 4. Setup Record Schedule Setup the Schedule to record. i Without setting record schedule, the DVR system wouldn’t start to record. 1. Click

15 2.1.1 Using the Virtual Keyboard Use the Virtual Keyboard and mouse to configure the DVR system. Just click or select the column and right-cli

16 2.2 Familiarizing the Functions in Preview Mode Name Function (1) Logout - Login: Using different user account to login the DVR system. The Us

17 2.2.1 Using the PTZ Control Panel User can use PTZ control panel to operate the PTZ camera in preview mode. Before to use it, please enable the P

18 2.2.2 Familiarizing the Buttons in PTZ Control Panel (6) (5) (4) (3) (2)(1)(10)(9)(8)(7) Name Function (1) Close Exit PTZ camera controller. (2

19 2.3 Familiarizing the Functions in Playback Mode Click (playback) button at the lower right corner of Preview mode user interface to switch to Pl

20 2.3.1 Familiarizing the Functions in Playback Menu Click to call out the playback menu. 2.3.1.1 Select Playback File from Calendar Select re

21 2.3.1.2 Using the Event Log Viewer Show the record of activities that take place in the system. 1. Click the Event Log from playback menu. The E

22 2.3.1.3 To Search Using the Visual Search Search from a specific camera by Date, Hour, Minute, and Second. 1. Click the Visual Search from playba

23 2.3.1.4 To Set a Video Segment and Save Keep a portion of the recorded video. Following the below steps to Set and Save the Wanted Portion of the

WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR I

24 7. Click Save to output the video segment to USB storage device. 8. Qplayer application will be included in output video segment folder for play

25 2.4 Playback Backup Video You can playback the backup files and output video segment by using QPlayer applications on the PC. When you back up th

26 Name Function (5) Playback Control Buttons From left to right order: Begin: Move at the beginning of the recorded video file. Previous: Go back t

27 Name Function (10) Segment Keep a portion of the recorded video (see also Chapter 2.4.1.1). (11) Full screen View in full screen mode. To return

28 Chapter 3 Customizing the DVR System In the Preview screen mode, click button to customize your DVR system. When the DVR setting menu appears,

29 - Date Format: Select the date format which wants to display in preview and playback mode - AutoScan Period: Set the time gap of the Auto Scan f

30 Part II Click Next to go to next setup page, click Back can go back previous setup page. Click OK to accept the new settings, click Cancel to exit

31 if the time zone is in U.S. Eastern, the time offset is 1 hour. (3) Time Adjust the DVR system time and date. Click Setting to select the month, d

32 3.1.2 Network Setup Setup system network parameters. Click OK to save the configuration, click Cancel to exit without save. Click to call out vi

33 system time from network server. (5) Server Port Fill in the port number that is using for WebViewer connection. Default is 80. (6) Remote Port Th

Table of Contents Chapter 1 Introduction ... 11.1 Package Content .

34 3.1.3 User Setup User can create user accounts in different authority. Click Add to create a new user account. Click Cancel to exit without save.

35 - Name: Enter a name for the account. - Description: Enter a short description for the account. - Password: Assign a password for login authent

36 3.2 Camera Setup User can configure camera, motion mask, and PTZ camera parameters in this section. 3.2.1 Camera Setting Click to call out virt

37 3.2.2 Motion and Mask Setting Click Default will back to the factory default value. (1)(2)(3)(4) (1) Select Camera Select the camera number you w

38 and recorded. - Video Shield Enable: Enable/disable video shield function. - Video Shield: To select an area for video shield. Use the mouse dra

39 3.2.3 PTZ Camera Setting Configure PTZ camera parameters and preset position. Click OK to save the setting, click Cancel to exit without save. Wh

40 3.3 Recording Setup (1)(2)(3) (1) Camera Icons Select the camera number you want to set the recording setting. To select all the cameras, mark the

41 3.4 Schedule Setting Setup system schedule, record schedule, and holiday schedule for DVR system. 3.4.1 Setup System Schedule Schedule to record,

42 6. To store the setting, click Save. 7. To end Schedule Setting, click OK to exit and accept the setting and Cancel to exit. 3.4.2 Setup Record

43 un-select all schedule block. 5. To store the setting, click Save. 6. To end setting, click OK to exit and accept the setting and Cancel to exit

3.4 Schedule Setting ... 413.4.1 Setup System Schedu

44 3.5 Backup Setup In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represe

45 3.6 Alarm Setting In the Alarm Setting windows, click Add to create and set new alarm setting, click Delete to remove the selected alarm setting,

46 to all conditions. 5. Set condition of Camera. - Motion: click on the camera number (01 to 04) to set the condition for the system to alarm. - In

47 time in second before it stops the relay operation. In the Alarm Relay dialog box, mark from the available relay list; set to enable/disable the r

48 4. In the Stop Recording after text box, mark and set the number in second for the DVR system to continue recording after the alarm has ended. If

49 3.7 Viewing System Status To view the status of DVR system and channels.

50 Chapter 4 Using the USB Playback Console 4.1 Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP/Vista DDR 256 MB G

51 4.3 Running the USB Playback Console To run the application, click the icon on the PC desktop Name Function (1) Split Screen Mode Select fr

52 Name Function (6) Archive To select the video file source for playing. – DVR Recorded File (HD): To playback the recorded video from the hard

53 Name Function (17) Intelligent Search Search the changes in the motion detector frame (See also Chapter 4.3.7) (18) Sound /Sound bar Turn on

7.4.3 Familiarizing the RealTime Playback Buttons ... 88Chapter 8 Using HandyViewer and JavaViewer .

54 4.3.2 Playback DVR Recorded File from Hard Disk 1. Please have the hard disk which containing of recorded video data install on your PC or using

55 4.3.3 Playback Backup File(*.dvr) 1. Click Archive button. 2. Select Backup File(*.dvr) and click OK. 3. Locate the backup file folder and click

56 4.3.4 To Backup Recorded File HDD backup function allows user to backup recorded file from hard disk. 1. Click Adv. Function → HDD Backup on U

57 4.3.5 To Search Using the Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the da

58 4.3.7 To Search Using the Intelligent Search 1. Click on the video screen on where you want to search. 2. Click Intelligent Search. The Intellig

59 Chapter 5 ImageVerification Image Verification is a watermark-checking program to identify the authenticity of a saved image (e.g. by snapshot).

60 Chapter 6 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video pic

61 Name Function (10) History Box List all the actions. (11) Undo Delete the last action. (12) Noise Reduce Adjust the softness and repair the

62 Chapter 7 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature

63 After installing the WebCamX.cab and when connecting to the DVR system, you are required to enter default account ID (Admin; capital in first lett

1 Chapter 1 Introduction 1.1 Package Content (1) (2) (3) (4) (5) (6) (7) (1) SEB3104H unit (2) Quick Installation Guide (3) Software

64 7.1 Familiarizing the WebViewer Buttons Right-clicking on the WebViewer video screen, enables you to start video recording, change video quality,

65 Name Function (10) Remote setup Change the DVR server settings (see also Chapter 7.1.1). (11) PTZ Control Initiate PTZ camera controller(see

66 7.1.1 To Setup Remote System Setting Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applie

67 7.1.1.2 Camera Setup (1)(2)(3)(4) (1) Camera icon Select the camera that user wants to set up. To select all cameras, mark All. (2) Camera Name En

68 7.1.1.3 Record Setup (1)(2)(3)(4) (1) Camera icon Select the camera that user wants to set up. To select channel 01~ 04, mark All. (2) Frame Rate

69 (4) Record Schedule By default, in 24 hours, the recording schedule is set to always record every hour. Refer to the table below to customize the

70 7.1.1.4 Alarm Setup (1)(2)(3)(4)(5)(6) 1. Select the alarm from (6) alarm list table. 2. In (1) user can change alarm Name and Description. 3. In

71 mode. If the retrieve time is un-mark, the alarm video will keep enlarging until user switch back to Preview mode manually. - Relay Output Set t

72 Message: Type the message. 9 Email Notice Setting Notice Interval: Set the period of time before it sends another e-mail notice. - Start Recordi

73 7.1.1.5 Network Setup (1)(2)(3)(4)(5) (1) Transmitting Cameras Select the camera to disable/enable camera can be view from remote site. (2) Networ

2 1.2 Features  Key Features - 4CH real-time recording and display - 1CH TV and VGA outputs synchronously - Individual adjust channel frame rate

74 translating domain names into Internet addresses. Users can register their own domain name on http://ddns.avers.com.tw. (See Appendix A) - Domain

75 7.2 Familiarizing the WebViewer PTZ Buttons Name Function (1) Direction buttons Adjust and position the focal point of the PTZ camera. Click

76 7.3 Familiarizing the Remote Console Buttons Name Function (1) Exit Close/minimize remote console application (2) Split Screen Mode Select fr

77 Name Function (15) Alarm Alert and display warning info. Only Administrator-level can reset and turn on, off and trigger the Sensor and Relay by

78 (3) Remote Server Enter the DVR Server IP and Server Port number that user wants to remote connect it. (4) Channel Settings The numbers from 1 to

79 7.4 Using the Remote Playback To use this feature, first switch to playback mode by clicking the Playback icon, and then, select the source of

80

81 7.4.1 Familiarizing the Local Playback Buttons Name Function (1) Split Screen Mode Select from 6 different split screen type to playback the re

82 Name Function (5) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slow

83 Name Function (16) Find Next Search for the next event or changes in the motion detector frame. You can use this when you are using Intelligent

3 1.3 Front Panel Name Function (1) System Power indicator System power status indicators. Indicate running state of system. Lights when the system

84 7.4.1.2 To Search Using the Visual Search 4. Click Visual Search. 5. In the Visual Search Setting dialog box, select the Camera number and the

85 7.4.1.3 To Search Using the Intelligent Search 1. Click on the video screen on where you want to search. 2. Click Intelligent Search. The Intell

86 7.4.2 Familiarizing the Download and Playback Buttons Name Function (1) Exit Click to close the application. (2) Progress bar Show the progr

87 Name Function (10) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second. (See also Chapter 7.4.1.2) (11) Audi

88 7.4.3 Familiarizing the RealTime Playback Buttons Name Function (1) Split Screen Mode Select from 3 different split screen type to playback the

89 Name Function (6) Archive – Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – Als

90 Chapter 8 Using HandyViewer and JavaViewer Users can use a mobile phone to access the DVR through Internet. Make sure your mobile phone support I

91 8.1.2 To install PDAViewer from the Internet 1. Make sure you are connected to the internet. 2. Open the web browser and enter the server IP. T

92 8.1.3 To Use the PDAViewer 1. Run the PDAViewer in the Programs. 2. Familiarizing the PDAViewer buttons. (7)(6)(5)(3)(4)(8)(9)(10)(1)(2) Name

93 Name Function (9) Zoom Zoom in and out the PTZ camera image. (10) Direction buttons Adjust and position the focal point of the PTZ camera. 3.